14th International Conference On Turbochargers And Turbocharging / Institution of Mechanical Engineers  

Public ISBD Titre : 14th International Conference On Turbochargers And Turbocharging : Proceedings of the International Conference on Turbochargers and Turbocharging (London, UK, 2021) Type de document : document électronique Auteurs : Institution of Mechanical Engineers, Auteur Editeur : London : CRC Press/Balkema Année de publication : 2020 Importance : 489 p. Présentation : ill., couv. ill. ISBN/ISSN/EAN : 978-1-00-313217-2 Langues : Anglais (eng) Catégories : Open Access Publications Tags : Technology     Engineering  Applied physics  Heat engineering  Internal combustion engines Index. décimale : 621.43 Moteurs à combustion interne Résumé : 14th International Conference on Turbochargers and Turbocharging addresses current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The contributions focus on the development of air management solutions and waste heat recovery ideas to support thermal propulsion systems leading to high thermal efficiency and low exhaust emissions. These can be in the form of internal combustion engines or other propulsion technologies (eg. Fuel cell) in both direct drive and hybridised configuration. 14th International Conference on Turbochargers and Turbocharging also provides a particular focus on turbochargers, superchargers, waste heat recovery turbines and related air managements components in both electrical and mechanical forms En ligne : https://doi.org/10.1201/9781003132172 14th International Conference On Turbochargers And Turbocharging : Proceedings of the International Conference on Turbochargers and Turbocharging (London, UK, 2021) [document électronique] / Institution of Mechanical Engineers, Auteur . - London : CRC Press/Balkema, 2020 . - 489 p. : ill., couv. ill. ISBN : 978-1-00-313217-2 Langues : Anglais (eng) Catégories : Open Access Publications Tags : Technology     Engineering  Applied physics  Heat engineering  Internal combustion engines Index. décimale : 621.43 Moteurs à combustion interne Résumé : 14th International Conference on Turbochargers and Turbocharging addresses current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The contributions focus on the development of air management solutions and waste heat recovery ideas to support thermal propulsion systems leading to high thermal efficiency and low exhaust emissions. These can be in the form of internal combustion engines or other propulsion technologies (eg. Fuel cell) in both direct drive and hybridised configuration. 14th International Conference on Turbochargers and Turbocharging also provides a particular focus on turbochargers, superchargers, waste heat recovery turbines and related air managements components in both electrical and mechanical forms En ligne : https://doi.org/10.1201/9781003132172

Réservation

Réserver ce document

Exemplaires (1)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
9781003132172	621.43 INS	E-Book	En Ligne	Physique appliquée	Disponible

Discontinuous deformation analysis in rock mechanics practice / Yossef H. Hatzor

Public ISBD Titre : Discontinuous deformation analysis in rock mechanics practice Type de document : texte imprimé Auteurs : Yossef H. Hatzor ; Guowei Ma ; Gen-hua Shi Editeur : London : CRC Press/Balkema Année de publication : 2017 Collection : ISRM book series num. 5 Importance : 388 p. Présentation : ill., couv. ill. en coul. Format : 26 cm ISBN/ISSN/EAN : 978-1-138-02768-8 Note générale : Bibliogr. pp.361-380 Langues : Anglais (eng) Catégories : Livres Tags : Rock mechanics  Rock deformation Index. décimale : 624.151 Géotechnique Résumé : The numerical, discrete element, Discontinuous Deformation Analysis (DDA) method was developed by Dr. Gen-hua Shi while he was working at the University of California, Berkeley, under the supervision of Prof. Richard E. Goodman in the late 1980s. Two-dimensional DDA was published in 1993 and three-dimensional DDA in 2001. Since its publication DDA has been verified, validated and applied in numerous studies worldwide and is now considered a powerful and robust method to address both static and dynamic engineering problems in discontinuous rock masses. In this book Yossef H. Hatzor and Guowei Ma, co-chairs of the International Society for Rock Mechanics (ISRM) Commission on DDA, join Dr. Shi in authoring a monograph that presents the state of the art in DDA research. A comprehensive discussion of DDA development since its publication is provided in Chapter 1, followed by concise reviews of 2D and 3D DDA in chapters 2 and 3. Procedures to select geological and numerical input parameters for DDA are discussed in Chapter 4, and DDA validation and verification is presented in Chapter 5. Applications of DDA in underground and rock slope engineering projects are discussed in chapters 6 and 7. In Chapter 8 the novel contact theory recently developed by Dr. Shi is published in its complete form, for the first time. This book is published within the framework of the ISRM Book Series and is the contribution of the ISRM DDA Commission to the international rock mechanics community. Discontinuous deformation analysis in rock mechanics practice [texte imprimé] / Yossef H. Hatzor ; Guowei Ma ; Gen-hua Shi . - London : CRC Press/Balkema, 2017 . - 388 p. : ill., couv. ill. en coul. ; 26 cm. - (ISRM book series; 5) . ISBN : 978-1-138-02768-8 Bibliogr. pp.361-380 Langues : Anglais (eng) Catégories : Livres Tags : Rock mechanics  Rock deformation Index. décimale : 624.151 Géotechnique Résumé : The numerical, discrete element, Discontinuous Deformation Analysis (DDA) method was developed by Dr. Gen-hua Shi while he was working at the University of California, Berkeley, under the supervision of Prof. Richard E. Goodman in the late 1980s. Two-dimensional DDA was published in 1993 and three-dimensional DDA in 2001. Since its publication DDA has been verified, validated and applied in numerous studies worldwide and is now considered a powerful and robust method to address both static and dynamic engineering problems in discontinuous rock masses. In this book Yossef H. Hatzor and Guowei Ma, co-chairs of the International Society for Rock Mechanics (ISRM) Commission on DDA, join Dr. Shi in authoring a monograph that presents the state of the art in DDA research. A comprehensive discussion of DDA development since its publication is provided in Chapter 1, followed by concise reviews of 2D and 3D DDA in chapters 2 and 3. Procedures to select geological and numerical input parameters for DDA are discussed in Chapter 4, and DDA validation and verification is presented in Chapter 5. Applications of DDA in underground and rock slope engineering projects are discussed in chapters 6 and 7. In Chapter 8 the novel contact theory recently developed by Dr. Shi is published in its complete form, for the first time. This book is published within the framework of the ISRM Book Series and is the contribution of the ISRM DDA Commission to the international rock mechanics community.

Réservation

Réserver ce document

Exemplaires (4)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
C1-06688/17	624.151 HAT C1	Livre	2ème Cycle.(Salle 3ème Étage)	Génie Civil	Exclu du prêt
C2-06689/17	624.151 HAT C2	Livre	2ème Cycle.(Salle 3ème Étage)	Génie Civil	Disponible
C3-08190/22	624.151 HAT C3	Livre	2ème Cycle.(Salle 3ème Étage)	Génie Civil	Disponible
C4-08191/22	624.151 HAT C4	Livre	2ème Cycle.(Salle 3ème Étage)	Génie Civil	Disponible

Mining and rock construction technology. Desk reference

Public ISBD Titre : Mining and rock construction technology. Desk reference : rock mechanics, drilling and blasting, including acronyms, symbols, units, and related terms from other disciplines Type de document : texte imprimé Auteurs : Agne Rustan, Editeur scientifique Editeur : London : CRC Press/Balkema Année de publication : 2011 Importance : 454 p. Présentation : couv. ill. en coul. Format : 26 cm. ISBN/ISSN/EAN : 978-0-415-60043-9 Note générale : Bibliogr. pp.431-454 Langues : Anglais (eng) Catégories : Livres Tags : Génie minier -- Encyclopédies  Terrassement -- Encyclopédies  Mécanique des roches -- encyclopédies Index. décimale : 622 Techniques minières et activités connexes Résumé : A comprehensive and illustrated desk reference with terms, definitions, explanations, abbreviations, trade names, quantifications, units and symbols used in rock mechanics, drilling and blasting. Now including rock mechanics as well, this updated edition presents 5127 terms, 637 symbols, 507 references, 236 acronyms, 108 formulas, 68 figures, 47 tables, 58 abbreviations and 7 shortened forms. Terms are also included from related disciplines commonly used, such as chemistry, detonics, fractography, fracture dynamics, mechanics and strength of materials, micro mechanics, geology, geophysics, image analysis, petrology, physics, seismology and more. This extended and updated edition of 'Rock Blasting Terms and Symbols' (Balkema, 1998) by Dr. Agne Rustan is an essential reference for engineers and advanced students in mining, geotechnical, geological, tunneling and construction engineering. Mining and rock construction technology. Desk reference : rock mechanics, drilling and blasting, including acronyms, symbols, units, and related terms from other disciplines [texte imprimé] / Agne Rustan, Editeur scientifique . - London : CRC Press/Balkema, 2011 . - 454 p. : couv. ill. en coul. ; 26 cm. ISBN : 978-0-415-60043-9 Bibliogr. pp.431-454 Langues : Anglais (eng) Catégories : Livres Tags : Génie minier -- Encyclopédies  Terrassement -- Encyclopédies  Mécanique des roches -- encyclopédies Index. décimale : 622 Techniques minières et activités connexes Résumé : A comprehensive and illustrated desk reference with terms, definitions, explanations, abbreviations, trade names, quantifications, units and symbols used in rock mechanics, drilling and blasting. Now including rock mechanics as well, this updated edition presents 5127 terms, 637 symbols, 507 references, 236 acronyms, 108 formulas, 68 figures, 47 tables, 58 abbreviations and 7 shortened forms. Terms are also included from related disciplines commonly used, such as chemistry, detonics, fractography, fracture dynamics, mechanics and strength of materials, micro mechanics, geology, geophysics, image analysis, petrology, physics, seismology and more. This extended and updated edition of 'Rock Blasting Terms and Symbols' (Balkema, 1998) by Dr. Agne Rustan is an essential reference for engineers and advanced students in mining, geotechnical, geological, tunneling and construction engineering.

Réservation

Réserver ce document

Exemplaires (4)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
C1-03156/15	622 MIN C1	Livre	2ème Cycle.(Salle 3ème Étage)	Techniques Minières et activités connexes	Exclu du prêt
C2-03157/15	622 MIN C2	Livre	2ème Cycle.(Salle 3ème Étage)	Techniques Minières et activités connexes	Disponible
C3-03158/15	622 MIN C3	Livre	2ème Cycle.(Salle 3ème Étage)	Techniques Minières et activités connexes	Disponible
C4-03159/15	622 MIN C4	Livre	2ème Cycle.(Salle 3ème Étage)	Techniques Minières et activités connexes	Disponible

Rock Engineering and Rock Mechanics

Public ISBD Titre : Rock Engineering and Rock Mechanics : structures in and on Rock Masses : proceedings of Eurock 2014, ISRM European Regional Symposium, Vigo, Spain, 26-28 May 2014 Type de document : texte imprimé Editeur : London : CRC Press/Balkema Année de publication : 2014 Importance : 350 p. Présentation : ill Format : 24 cm Accompagnement : CD ISBN/ISSN/EAN : 978-1-138-00149-7 Note générale : Index Langues : Anglais (eng) Catégories : Livres Tags : Rock mechanics -- Congresses  Technology & engineering -- Civil -- General Index. décimale : 624.151 Géotechnique Résumé : Rock Engineering and Rock Mechanics: Structures in and on Rock Masses covers the most important topics and state-of-the-art in the area of rock mechanics, with an emphasis on structures in and on rock masses. The 255 contributions (including 6 keynote lectures) from the 2014 ISRM European Rock Mechanics Symposium (EUROCK 2014, Vigo, Spain, 27-29 May 2014) are subdivided under the following 10 headings: - Rock properties and testing methods - Rock mass characterization - Rock mechanics for infrastructures - Mining and quarrying rock mechanics - Design methods and analysis - Monitoring and back analysis - Excavation and support - Case histories and Preservation of natural stone - Petroleum engineering, hydro-fracking and CO2 storage - Applicability of EUROCODE-7 in rock engineering Rock Engineering and Rock Mechanics: Structures in and on Rock Masses will be of interest to rock mechanics academics as well as to professionals who are involved in the various branches of rock engineering. Rock Engineering and Rock Mechanics : structures in and on Rock Masses : proceedings of Eurock 2014, ISRM European Regional Symposium, Vigo, Spain, 26-28 May 2014 [texte imprimé] . - London : CRC Press/Balkema, 2014 . - 350 p. : ill ; 24 cm + CD. ISBN : 978-1-138-00149-7 Index Langues : Anglais (eng) Catégories : Livres Tags : Rock mechanics -- Congresses  Technology & engineering -- Civil -- General Index. décimale : 624.151 Géotechnique Résumé : Rock Engineering and Rock Mechanics: Structures in and on Rock Masses covers the most important topics and state-of-the-art in the area of rock mechanics, with an emphasis on structures in and on rock masses. The 255 contributions (including 6 keynote lectures) from the 2014 ISRM European Rock Mechanics Symposium (EUROCK 2014, Vigo, Spain, 27-29 May 2014) are subdivided under the following 10 headings: - Rock properties and testing methods - Rock mass characterization - Rock mechanics for infrastructures - Mining and quarrying rock mechanics - Design methods and analysis - Monitoring and back analysis - Excavation and support - Case histories and Preservation of natural stone - Petroleum engineering, hydro-fracking and CO2 storage - Applicability of EUROCODE-7 in rock engineering Rock Engineering and Rock Mechanics: Structures in and on Rock Masses will be of interest to rock mechanics academics as well as to professionals who are involved in the various branches of rock engineering.

Réservation

Réserver ce document

Exemplaires (2)

Code-barres	Cote	Support	Localisation	Section	Disponibilité
C1-06726/17	624.151 EUR C1	Livre	2ème Cycle.(Salle 3ème Étage)	Génie Civil	Exclu du prêt
C2-06727/17	624.151 EUR C2	Livre	2ème Cycle.(Salle 3ème Étage)	Génie Civil	Disponible

---

1 (1 - 4 / 4)